30 seconds.
3 steps.
Real smoke.

Everything you need for your first session, and every one after that.

Buy Now
How to use FLWRCRT
REAL COMBUSTION REAL SMOKE NO OIL NO CARTRIDGE WASTE REAL FLOWER

Four Parts.
One Job.

510 thread base Button 510 batteries only. FLWRCOILTM Igniter Combust flower — real smoke. Wooden mouthpiece Advances flower, delivers real smoke. Flower chamber Pack with your flower.
Wooden mouthpiece Advances flower, delivers real smoke. Flower chamber Pack with your flower. FLWRCOILTM Igniter Combust flower — real smoke. 510 thread base Button 510 batteries only.

The Full Walkthrough.

Step 1

Connect & test.

Screw FLWRCRT onto any button-activated 510-thread battery. Hand-tight only — don’t overtighten.
If your battery has variable voltage, set it in the 3.5V–4.5V range — start low for a smoother draw, dial up to preference.
Press the battery button for a second or two with no flower loaded — you’ll see the FLWRCOIL glow.

STEP 2

Load your Flower.

Remove the black FLWRCOIL Igniter Cap from the glass cartridge. Load the cartridge with whole flower. Use nugs, do not grind. Fill to about 3/4 full. Don’t overpack. Reattach the igniter cap.
The cartridge should be loose but full. Flower should have room to breathe. The cap should reattach snugly with no resistance.

STEP 3

Break the seal, Ignite, and Inhale.

Push the wooden mouthpiece in to break the vacuum seal and advance the flower. The flower should lightly touch the FLWRCOIL Igniter. Press and hold the battery button for two to three seconds to let the flower combust. Visible smoke fills the cartridge within a few seconds. This is real smoke, not vapor.
Draw slowly and steadily while the chamber fills with smoke. Enjoy.

Care & Maintenance

Cleaning the FLWRCOIL Igniter Cap

Unscrew, tap residue out, and wipe with isopropyl alcohol on a cotton swab. Every 8 to 10 loads.

Cleaning the Cartridge

The glass cartridge can be wiped with isopropyl alcohol if needed, but most users won’t need to clean it. Empty remaining flower between strain changes for a cleaner taste profile.

Wooden Mouthpiece

Wipe with a dry cloth. Don’t soak it. Don’t put it in the dishwasher.

Storage

Store the assembled FLWRCRT upright when not in use. Keep it dry and out of direct sunlight. The original packaging works fine. A small case works better.

Battery Care

Your 510 battery is not our product, but here are the basics. Don’t leave it on the charger after it is full. Don’t expose it to extreme heat or cold. If it stops firing, charge it before assuming anything is broken.

When to Replace

The FLWRCRT is highly reusable — swap it for a fresh one when performance drops.

The stuff people actually ask.

Questions, answered.

Before you buy.

What is FLWRCRT, exactly? +

FLWRCRT™ is an electric-combustion system for whole flower — load nugs, attach a 510 battery, get real smoke.

Is this a vaporizer? +

No. Vaporizers heat flower below combustion temperature to release vapor. FLWRCRT produces smoke through combustion.

What battery do I need? +

A button-activated 510-thread battery. Draw-activated batteries — the kind that fire when you inhale — won’t work. FLWRCRT ignites with a press-and-hold, so you need the button. If your battery has variable voltage, FLWRCRT operates in the 3.5V–4.5V range — start at the low end and adjust to preference.

Will a draw-activated battery work? +

No. Draw-activated (buttonless) batteries only fire while you inhale. FLWRCRT needs a two-to-three-second press-and-hold to combust the flower. Button battery, always.

What’s included when I buy? +

The FLWRCRT cartridge, the FLWRCOIL Igniter Cap, and the wooden mouthpiece. You bring the 510 battery and the flower.

Do you sell pre-filled cartridges? +

No. FLWRCRT is empties only on this site. You load your own flower.

Will it work with my STIIIZY battery? +

If your STIIIZY is a button-activated 510-thread battery, yes. If it’s draw-activated or a proprietary STIIIZY pod battery, no.

Getting started.

How fine should I grind my flower? +

Don’t grind. Whole nug works best. Pinch-break a piece if you need to size it down.

How full should I pack the cartridge? +

About 3/4 full. Leave room for airflow.

How do I know if the FLWRCOIL is heating? +

In Step 1, you’ll see the FLWRCOIL glow when you press the battery button for a second or two.

How long does the first hit take? +

A few seconds. If it takes longer than 5 to 8 seconds, check the battery, voltage, and flower contact.

Troubleshooting

My FLWRCRT isn’t producing smoke. +

Most likely causes:

  1. Mouthpiece is not pushed in fully.
  2. Battery is dead.
  3. Battery is draw-activated (no button) — FLWRCRT requires a button battery.
  4. Battery voltage is too low.
  5. Chamber is empty or underpacked.
  6. FLWRCOIL is not connecting.
It tastes burnt. +

Voltage is too high. Keep within the 3.5V–4.5V range — if the flavor burns harsh, dial down toward 3.5V.

The hits are weak. +

Battery voltage may be too low, or the chamber may be underpacked. If neither is the cause, the FLWRCOIL may need replacement.

The flower doesn’t taste like flower. +

Check what you loaded. Old, dry, or low-quality flower will produce an old, dry, or low-quality experience.

Care

How do I clean it? +

Wipe the FLWRCOIL Igniter Cap with isopropyl alcohol on a cotton swab. Wipe the wooden mouthpiece with a dry cloth. Don’t submerge anything.

How long does the FLWRCOIL Igniter Cap last? +

The FLWRCOIL is highly reusable — you’ll get many sessions from each one. Replace it when you notice the burn getting less consistent.

Shipping & eligibility.

Where do you ship? +

We ship the FLWRCRT device, with no flower included, to states where cannabis accessories are legal for adults 21+.

Do I need to be 21? +

Yes. Cannabis is for adults.